How do Induction Heating Coils Work?


Inductor heating coils, or inductors in short, are important components in an induction heating system, which decide upon how effectively and efficiently the equipment is heated. These are water-cooled copper conductors made up of copper tubing that are readily formed in the shape of a coil for making the induction heating process possible.

Why Is Competition Important To Drive Better Results?


No matter what business you are into, you have to face tough competition. Your competitors may be better in providing the best products/services, or may be using better technologies and executing better operations. You may look at your competitors as terrible people and the competition as a negative implication, but this is only because you are unable to reach that point of success. But, when you look at it in a positive way, competition can actually be the driving force that pushes businesses to do much more than t hey could.

Why Is EMI/RFI Shielding Important For Cable Assemblies?


The world is full of smart and intelligent equipment like cellphones, WiFi, Bluetooth, etc. whose signals are crowding the airwaves. This crowding results in signals from one device crossing over another; thus resulting in thousands of signals intersecting together, and creating a lot of electrical noise. These signals are targeted by cable assemblies, who work as antennas to draw in or emit signals, thus attracting the electrical noise, which results in the phenomenon that we call electromagnetic interference (EMI) or radio frequency interference (RFI).

Cable Assembly Vs. Wire Harness


The words “cable assembly” and “wire harness” are often used interchangeably. In fact, the terms “cable” and “wire” are also used interchangeably. But, this is only for a layman. For professionals and those knowing about the technicality of these components, all these terms have individual meaning and importance; and they all are different from the other. Although they all are used to transfer electricity between different locations, they all are different, and have a distinct purpose. And, the success of your application and electrical appliance depends on choosing the right cable/wire and cable assembly/wire harness, based on the specifications of the application to be used in. Now, if you are confused and don’t know these are different, we are here to help you understand the difference so that you can make the right choice.

Why Should You Use Overmoulded Cable Assemblies?

Wire harness manufacturers in IndiaEvery electrical appliance requires cables to operate; and when there are many cables to be installed into a single application, they are generally input as cable assemblies. These cable assemblies combine multiple cables together into a single unit, making it organized and easy to install, so that installation, maintenance, and repairing becomes easier and faster, without any errors.

Evaluation Of A PCB Assembly Manufacturer


With the world, and every country, being flooded with so many PCB service providers, how do we know how to settle for? It is definitely a tough call for companies to settle for one PCB assembly manufacturer from India with whom they can build up a long-term relationship. But, with the guidelines composed in this blog, it can become an easy task to pick out the perfect PCB service provider for you.

General Rules For Designing And Manufacturing A PCB

General Rules For Designing And Manufacturing A PCB

One of the major aspects that decide the cost and success rate of a product is its design. Any changes made during the designing phase can elevate or drop the results. This clearly shows that the design of a product is the most crucial element. In this blog, we will learn about the designing and manufacturing of a PCB assembly, one of the most important elements of any electronic application.

How Are Printed Circuit Boards Manufactured?

How-Are-Printed-Circuit-Boards-ManufacturedPrinted Circuit Boards (PCBs) are self-contained modules of interconnected electronic components found in a variety of electronic devices. The circuits are formed by a thin layer of conducting material deposited or printed on the surface of an insulating board that is called the substrate; after which a number of tiny electronic components are placed on the surface and soldered to the interconnecting circuits. PCBs could be single-sided, double-sided, or multi-layered. Clearly as the names suggest, single-sided boards have components on one side of the substrate; double-sided boards have components on both sides of the substrate; and multi-layered boards have a substrate made up of layers of printed circuits separated by layers of insulation. With these basics known, now let us get into the details of how a Printed Circuit Board is manufactured.

How To Choose The Best Cable Assembly Manufacturer?


Who doesn’t want products that are high in quality and low on costs? Obviously, we all would love to have such products. And, when it comes to cable assemblies, we would always want to get the best quality ones as we know how important these products are for our applications. Today’s complex applications require innumerous cable assemblies to be installed, which highly increases the cost of the application. This is why we would want to get assemblies at cheaper costs in order to reduce the overall cost of the application. To satisfy this search, you can get in touch with Miracle Electronics, one of the leading cable assembly manufacturers in India, where you can get A-quality assemblies at the most reasonable prices. However, in spite of us saying that Miracle Electronics is the best, you must know how to analyze to choose the best cable assembly manufacturer. You can use these below mentioned tips and confirm how Miracle is the best solution for you.

How Is Toroidal Coil Different From A Normal Coil?


Toroidal coils, first and foremost, are different in terms of shape, when compared to any other types of coils. They are doughnut or ring-shaped coils, which have a doughnut-shaped core, around which wire is wound. The wire is repeatedly taken through the central hole and wrapped back around the outside. It is this mechanism of building the wire-packed core that gives toroidal coils the shape they possess; unlike other coils that are cubic or rectangular in shape. In cubic or rectangular shaped coils, wire is wrapped around a bobbin, having a set of cores fitted through the center and around the outside of the bobbin.